Mold Making Latex Rubber - 1 Gallon - AeroMarine Products
5 (629) · $ 19.00 · In stock
AeroMarine Products Liquid Mold Making Latex is natural latex with a solids content between 68 and 70 percent, which minimizes shrinkage and allows the pick up of fine details. It contains ammonia to preserve it. Our latex mold making rubber is tough, flexible, and is resistant to tearing. It is brushed directly onto the pattern, allowed to dry, and then reapplied. This process is continued for 15 to 20 coats until the latex mold has reached the desired thickness. Latex is best for making molds for casting cement, concrete, plaster, hydrocal, or hydrostone. It can be used for limited runs of resin castings, but the yield is low. The 1 gallon size covers 14 square feet at 1/16" thickness. Not for use on Human skin! Not for making masks!
4lb. Density Foam - 1/2 Gallon Kit - Aeromarine Products Inc.
White Casting Resin - 2 Gallon Kit - Aeromarine Products Inc.
Silicone Accelerator - 1 Gallon - AeroMarine Products
Talc Resin Thickener - 5 Gallon
1/32 Milled Fiber Resin Thickener - 1/2 Gallon
Talc Resin Thickener - 1/2 Gallon
EnvironMolds LayTex Liquid Latex Mold Making Rubber 32-OZ
Latex Rubber Mould Making – Art Academy Direct, Liquid Latex For Crafts
Epoxy Colorant: Shop Black, White & Grey Epoxy Resin Pigment Dyes
Mold Making Latex Rubber - 55 Gallon - AeroMarine Products
Concrete Molding Stamping Rubber - 2 Gallon Kit - Aeromarine Products Inc.
Mold Making Latex Rubber - 1/2 Gallon - AeroMarine Products
EnvironMolds LayTex Liquid Latex Mold Making Rubber 32-OZ
300/11 Epoxy Resin Adhesive - 1/2 Gallon Kit - Aeromarine Products Inc., Epoxy Resin 2 Gallon Kit
