Home
90 degree silicone hose
Pegasus Auto Racing Black Silicone Hose, 3/4″ I.D. 90 degree Elbow

Pegasus Auto Racing Black Silicone Hose, 3/4″ I.D. 90 degree Elbow

4.7 (713) · $ 15.00 · In stock

Our silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand-crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from -50° C to +180° C (-58° F to 356° F). This Stealth Black 90 degree elbow has a 3/4 ID with a smooth, shiny wipe-down finish. The legs measure at least 4 inches long (measured from the centerline of the opposite leg). The 3-ply reinforcement results in a working pressure rating in excess of 65 psi and a 4.5mm wall thickness (28mm / 1 1/8 OD). Use our Hose Joiners (HJ19) and our Lined Hose Clamps (Part No. 3613-1.75) to construct the exact shapes you need. Note: This hose is NOT formulated for use in oil or fuel plumbing applications. It will handle an air-fuel mixture and will survive occasional spills and oil leaks, but it will not stand up to continuous exposure to liquid petroleum.

Black Silicone Hose, 2 I.D. 135 degree Elbow, 4 Legs - Pegasus

Black Silicone Hose, 2 3/4 x 2.00 inch ID Straight Reducer

Vibrant Performance Nylon Reinforced Silicone Heater Hose is very flexible and designed to withstand elevated temperatures (Temperature Range: -65F to